Release Notes for Spectrum Digital OMAP Emulation Drivers

 

Spectrum Digital Inc

12502 Exchange Dr.

Suite 440

Stafford, Texas 77477

 

Web:                http://emulators.spectrumdigital.com/omap/

Support:           mailto:support@spectrumdigital.com

Support URL:   http://support.spectrumdigital.com/

Phone:             281-494-4500

Fax:                 281-494-5310

 

Processors Supported

TMS470R1x, TMS470R2x(ARM915/ARM925/ARM926), TMS320C54X, TMS320C55X, OMAP2420

 

Operating Systems Supported

Windows 2000 with service pack 2 or higher, service pack 3 recommended for improved USB support

Windows XP, service pack 1 recommended for improved USB support

 

Emulators Supported:

XDS510PP, SPI510, SPI515, XDS510PP_PLUS, SPI525, XDS510USB

 

Code Composer Version Supported:

Release 2.4 Beta

 

Product Release:         2.40.01

Release Date;              Nov-2004

 

Important Details

  • Code Composer Studio 2.4, 3.0, 3.1 and associated emulation drivers no longer support Windows 98/SE, Windows ME or WinNT4.

·         Release 2.40.00 is beta release to support CCS 2.40 limited release. 

·         See the ReadMeOmap2420.text file for install specifics and use with the TI OMAP24xx Development Platform, (H4 Board).  Also, see SdTechNote_1.pdf for general OMAP debug details.

New Features

  • Support for CCS 2.4 Connect/Disconnect
  • Updated profiler support for ARM7/ARM92x
  • Updated support for ARM11/OMAP2420
  • Multiple XDS510USB emulator support. See SdTechNote_4.pdf for details.
  • Add in support for ARM7S soft core

History

Release 2.20.05

  • Include support for OMAP2420 device (ARM11).

 

Release 2.20.04

  • Merge Release 2.20.03 and 2.20.03 Patch into a single install

 

Release 2.20.03 Patch

  • Update drivers to support ARM7 core revision 4

·         Update drivers and configuration for support DM320.  You should install CCS updates for DM310/DM320 target content available from TI.

·         Update drivers support for OMAP 730 ES1.1.  If you are still using OMAP730 ES1.0 silicon then you should continue using SD emulation driver release 2.20.02 and the OMAP730 patch.

 

 

Release 2.20.03

·         Update XDS510USB drivers to improve code step performance

·         Update SDFlash binary to v1.60 for side-by-side support with C2000 tools

·         Update SDConfig to support changes in SDFlash v1.60.

 

Release 2.20.02

·         Include XDS510USB driver support for OMAP161x

 

Release 2.20.01

·         OMAP16xx support

·         Added tech note SdTechNote_1.pdf which addresses OMAP16xx specific emulation questions

 

Release 2.20

·         Support for CCS 2.2

Installation

  1. If you have previously installed a CCS 2.x emulation driver or a CCS 2.4 alpha/beta driver then uninstall these drivers.
  2. Run SetupCCSOMAP_v24000.exe.  The install directory should be your current Code Composer Studio install directory, generally “c:\CCStudio”.
  3. If using an XDS510USB emulator, unplug and replug the USB cable to force a complete driver update.
  4. If this is first time install of the XDS510USB hardware then Windows will pop up the Hardware Install Wizard to install USB drivers.  If this occurs you need to direct the wizard to look in the directory <CCS_INSTALLDIR>\specdig\xds510usb to find the USB .inf/.sys files.  Once Windows has completed the hardware setup, unplug and replug the USB cable.

Notes

  1. CCS 2.21 drivers are forward compatible with CCS 2.4/3.x with two exceptions. First CCS 2.21 drivers lack the Connect/Disconnect feature but will work in CCS 2.4x/3.x environment.  Second, testing has shown that CCS 2.21 RTDX is not fully compatible with CCS 2.4/3.x, RTDX and may fail to send/receive data.
  2. CCS 2.4/3.x drivers are NOT backward compatible to CCS 2.x drivers.  When a CCS 2.4x/3.x driver is used under CCS 2.2x the emulation connection will fail to connect by default.
  3. If you are using the XDS510USB emulator and move back and forth between CCS 2.x and CCS 2.4/3.x then you should unplug and replug the USB cable between CCS sessions.  This will maintain the necessary relationship between a CCS 2.x and CCS 2.4/3.x-driver stack.  You must also select the correct SdConfig for the current CCS focus.  That is select ”SdConfig OMAP v2.40” if using CCS 2.40.  SdConfig will automatically load emulation drivers if they are not already loaded to the XDS510USB so you must select the SdConfig for the CCS you are targeting.
  4. If you intend on having a dual CCS 2.4/3.x and CCS 2.2x side by side install then read the instructions in the file _CCSV22_DoAutoConnect.  This file is located in your < CCS_INSTALLDIR >\drivers directory.  This provides details on how you can install/copy CCS 2.4x drivers into a CCS 2.21 environment.

 Where To Find Things

Under the installation directory, <INSTALL_DIR> you can find the following:

 

·         docs\pdf :                      Emulator user guides and schematics.

·         docs\releasenotes:         This file and other release notes.

·         drivers:                          Emulation drivers, *.dvr files.

·         drivers\import:                CCS setup configuration files.

·         specdig\SDConfig:         Spectrum Digital emulator configuration utility.

·         specdig\SDFlash:          Spectrum Digital FLASH programming utility.

·         specdig\xds510usb:       XDS510USB win32 .sys and .inf file.

  • specdig\sdjtag:              Source/binaries for SD JTAG interface with some ARMx examples.
  • specdig\sdtsrv:              Header/libs for sdtsrv interface.